A range of accessories are available for the BrakeCheck, including a printer,
carry case and PC software.
Please click on the tabs above for more information.
IR Printer for BrakeCheck
Part Code: BOW805
This wireless infrared printer,
enclosed in a ruggedized rubber casing, allows the BrakeCheck to print brake test results after each test.
The printer is supplied with a charger, with an appropriate plug for the destination country.
Carry Case for BrakeCheck
Part Code: BOW813
carry case for the BrakeCheck and its charger, which also accommodates the BOW805 wireless
printer (& its charger), a spare printer paper roll, and a CD.
part code BOW813 is for the carry case only. A complete kit, including
BrakeCheck and printer, can be ordered under part code BOW801KIT.
CabCheckS (Computer Aided BrakeCheck Software) allows data to be downloaded from the BrakeCheck
to your PC, from where it can be viewed on-screen, saved or printed. The Vehicle
Registration Number, Trailer ID and name of the inspector can be added to each test, as well as any
In order to use CabCheckS the BrakeCheck must be connected to
your PC via either the serial or USB download cables shown below.
CabCheckS is available in
the following versions:
Standard - as detailed above
- as Standard except without the facility to save data to the PC
specifically for the BOW812 BrakeCheck4Quarries
BOW810 - CabCheckS PC Software (please
specify required software version as detailed above)
USB download cable (if ordering for use with an existing BrakeCheck please specify
whether your BrakeCheck has the older 4-pin DIN connector, or the newer Mini USB connector)
BOW804 - Serial download cable (only compatible
with older BrakeChecks with a 4-pin DIN connector)
Please note that CabCheckS is not currently compatible with BrakeCheck Geo.
Handle Bar Bracket & Clamp for BrakeCheck
Part Code: BOW811
The handle bar bracket & clamp allows the
BrakeCheck to be securely mounted to the handlebar or front bull bar of a motorcycle or quad/ATV
in order to carry out brake tests. The combined BrakeCheck with handle bar bracket & clamp
(part codes BOW801 & BOW811) is fully DVSA-approved for the testing of brakes on all types of
vehicle, including for vehicles with ABS or linked braking systems.
that in order to retain DVSA approval for Class I & Class II vehicles, the BrakeCheck must
be secured to the vehicle using the BOW811 bracket.
Printer Paper Rolls
We stock spare printer paper rolls for a range of printers.
Paper for the current
BOW805 BrakeCheck printer can be ordered using part number BOW035. Please contact
us for the appropriate part code if you have an older printer.
Spare Mains Charger
A spare mains charger for the BrakeCheck can be ordered using part number BOW814. The
charger will be supplied with the appropriate mains plug for your country.